Product Data Sheet / Brochure
Table Of Contents
- Dell EMC PowerEdge R650xs Technical Specifications
- Contents
- Technical specifications
- Chassis dimensions
- System weight
- Processor specifications
- PSU specifications
- Supported operating systems
- Cooling fans specifications
- System battery specifications
- Expansion card riser specifications
- Memory specifications
- Storage controller specifications
- Drives
- Ports and connectors specifications
- Video specifications
- Environmental specifications
Table 25. 4 x3 .5-inch SAS/SATA and 8 x 2.5-inch SAS/SATA and No BP Configuration
Dell EMC PowerEdge Server
Standard Operating Support
(ASHRAE A2 compliant) All options
supported unless otherwise noted.
Dell EMC PowerEdge Server
Extended Inletient 40° C Operating
Support (ASHRAE A3 compliant)
Dell EMC PowerEdge Server
Extended Inletient 45° C Operating
Support (ASHRAE A4 compliant)
● The Following OCP3.0 NIC only
support optic cable with thermal
Spec 85C and power <=1.2 W
○ Broadcom Thor QP 25G SFP28
○ Solarflare Medford2 DP 25GbE
SFP28
○ Channel devices Intel E810-
XXVDA4 100G 4P DPN: 6C2NG
● The Following OCP3.0 NIC only
support optic cable with thermal
Spec 85C and power <=2.5W
( DPN:4WGYD)
○ Channel devices Intel E810-
CQDA2 100G QSF28 DPN:
N8PW5
● The Following PCIe NIC only support
optic cable with thermal Spec 85C
and power <=1.2W ( DPN: M14MK)
○ Broadcom 100G 2P QSF DPN:
61PR9
○ Mellonax 25G DP OCP3 CX6 LX
SPF28 DPN: 9XCTH
○ Mellonax 25G 2P OCP3 CX6 LX
SPF28 DPN: DN78C
● The Following PCIe NIC only support
optic cable with thermal Spec 85C
and power <=2.5 W
○ Channel Devices Intel
Columbiaville DP 100GbE
○ Intel Columbiaville 100G 2P Q28
DPN: DWNRF
● The following NVMe /SAS/SATA
could not be support in Rear Module
○ Samsung PM1735 Capacities >
6.4 TB
○ Samsung PM1733 Capacities >
7.68 TB
○ Kioxia CM6 all capacities
○ Kioxia PM6 SAS all capacities
○ Hynix PE8010 >3.84T capacities
● Two PSUs are required. System
performance may be reduced in the
event of a PSU failure
Table 26. 10 x 2.5-inch NVMe and 8 x 2.5-inch NVMe configuration
Dell EMC PowerEdge Server
Standard Operating Support
(ASHRAE A2 compliant) All options
supported unless otherwise noted.
Dell EMC PowerEdge Server
Extended Inletient 40°C Operating
Support (ASHRAE A3 compliant)
Dell EMC PowerEdge Server
Extended Inletient 45°C Operating
Support (ASHRAE A4 compliant)
● HPR Gold Fan is required
● 10 x 2.5-inch NVMe config Processor
TDP >220 W SM only support 4x2.5
NVMe at HDD#0~ HDD#3 and SM
Blank x 3 are required at HDD#4
~HDD#9
● Not support CPU TDP > 165W
● Not support BOSS M.2 Module
● Not support Non-Dell qualified
peripheral cards and Channel devices
(FW) cards
● Not support NIC consuming power
>= 25W.
A4 environment not Support
16 Technical specifications