Product Data Sheet / Brochure
Table Of Contents
- Dell EMC PowerEdge R650xs Technical Specifications
- Contents
- Technical specifications
- Chassis dimensions
- System weight
- Processor specifications
- PSU specifications
- Supported operating systems
- Cooling fans specifications
- System battery specifications
- Expansion card riser specifications
- Memory specifications
- Storage controller specifications
- Drives
- Ports and connectors specifications
- Video specifications
- Environmental specifications
NOTE: The software RAID S150 is supported on either SATA drives with chipset SATA only backplane or NVMe drives in
universal slots with processor direct PCIe cable connected backplane.
Drives
The PowerEdge R650xs system supports:
● Up to 10 x 2.5-inch SAS/SATA/NVMe (HDD/SSD) drives
● Up to 4 x 3.5-inch SAS/SATA (HDD/SSD) drives
● Up to 8 x 2.5-inch SAS/SATA/NVMe (HDD/SSD) drives
NOTE: For more information about how to hot swap NVMe PCIe SSD U.2 device, see the Dell Express Flash NVMe
PCIe SSD User's Guide at https://www.dell.com/support > Browse all Products > Data Center Infrastructure >
Storage Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Documentation > Manuals
and Documents.
Ports and connectors specifications
USB ports specifications
Table 10. PowerEdge R650xs system USB ports specifications
Front Rear Internal (Optional)
USB port type No. of ports USB port type No. of ports USB port type No. of ports
USB 2.0-
compliant port
One USB 2.0-
compliant port
One Internal USB 3.0-
compliant port
One
iDRAC Direct port
(Micro-AB USB
2.0)
One USB 3.0-
compliant ports
One
NOTE: The micro USB 2.0 compliant port can only be used as an iDRAC Direct or a management port.
NOTE: The USB 2.0 specifications provide a 5 V supply on a single wire to power connected USB devices. A unit load is
defined as 100 mA in USB 2.0, and 150 mA in USB 3.0. A device may draw a maximum of 5 unit loads (500 mA) from a port
in USB 2.0; 6 (900 mA) in USB 3.0.
NOTE: The USB 2.0 interface can provide power to low-power peripherals but must adhere to USB specification. An
external power source is required for higher-power peripherals to function, such as external CD/DVD Drives.
NIC port specifications
The PowerEdge R650xs system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports embedded on
the LAN on Motherboard (LOM) and integrated on the optional Open Compute Project (OCP) cards.
Table 11. NIC port specification for the system
Feature Specifications
LOM 1 GB x 2
OCP card (OCP 3.0) 1 GbE x 4, 10 GbE x 2, 25 GbE x 2, 25 GbE x 4
10 Technical specifications