Server User Manual
Table Of Contents
- Notes, Cautions, and Warnings
- Installation And Configuration
- Unpacking A Rack System
- Optional—Connecting The Keyboard, Mouse, And Monitor
- Connecting The Power Cable(s)
- Securing The Power Cable(s)
- Turning On The System
- Installing The Optional Bezel
- Complete The Operating System Setup
- Dell Software License Agreement
- Other Information You May Need
- Obtaining Technical Assistance
- NOM Information
- Technical Specifications
Installation And Configuration
WARNING: Before performing the following procedure, review the safety instructions that came with the system.
Unpacking A Rack System
Unpack your system and identify each item.
Assemble the rails and install the system in the rack following the safety instructions and the rack installation
instructions provided with your system.
Figure 1. Installing the Rails and System in a Rack
Optional—Connecting The Keyboard, Mouse, And Monitor
Figure 2. Optional—Connecting Keyboard, Mouse, and Monitor
Connect the keyboard, mouse, and monitor (optional).
The connectors on the back of your system have icons indicating which cable to plug into each connector. Be sure to
tighten the screws (if any) on the monitor's cable connector.
3