Specifications

Dell
Dell PowerEdge R210 II Technical Guide 44
12 Storage
12.1 Overview
The PowerEdge R210 II supports the following hard drive configurations:
• 2 x 3.5” cabled SATA drives using the motherboard SATA connector
• 2 x 3.5” cabled SAS, nearline SAS, or SATA drives using an add-on storage controller
• 4 x 2.5” SSD or SAS drives using an add-on storage controller
The hard-drive configuration must be selected at point of purchase and is not an upgrade option.
12.2 Hard Drives
Table 13 lists the supported hard drives for the PowerEdge R210 II. For the latest information on
supported hard drives, visit Dell.com
.
Table 13. Supported Hard Drives
Form Factor Capacity Speed Type
3.5” 250GB, 500GB, 1TB, 2TB, 4TB 7.2K SATA
3.5” 500GB, 1TB, 2TB, 4TB 7.2K NL SAS
3.5” 146GB, 300GB, 450GB, 600GB 15K SAS
2.5” 100GB, 200GB N/A SATA SSD
2.5” 146GB, 300GB, 600GB, 900GB 10K SAS
12.3 RAID Configurations
Table 14 details the factory RAID configurations for the PowerEdge R210 II.
Table 14. Factory RAID Configurations
Non-Mixed Drives,
all SATA, all SSD,
or all SAS
Config
Type
Configurations
# Name
Description Min HDD Max
HDD
SATA—No
RAID
1 MSTCBL On-board SATA Controller 1 2
SATA RAID 2 MSTR0CBL Embedded SATA SW RAID (PERC S100)—RAID 0 2 2