Installation manual

16 Installing Your Operating System
13 Select one of the following options:
• No, this computer is not on a network, or is on a network without
a domain. Make this computer a member of the following
workgroup:
Requires you to assign a workgroup name to your system.
Choosing this selection allows any system on the LAN with the
same workgroup name to connect to your system.
Enter a workgroup name, and click
Next .
• Yes, make this computer a member of the following domain:
Enter the appropriate domain name, and click Next .
The
Join Computer to < your_domain_name > Domain window
appears. Enter a domain administrator user name and password,
and click
OK .
NOTE: You must have the appropriate rights to join the domain.
Windows Setup continues the installation procedures, and then
restarts your system.
NOTE: This procedure may take several minutes.
The Welcome to Windows window appears.
14 Press <Ctrl><Alt><Delete>.
The
Log On to Windows dialog box appears.
15 Type your administrator password, and click OK .
The system prompts you to insert the
Microsoft Windows Server 2003
R2 Datacenter x64 Edition with SP2 Disk 2
CD into the CD drive.
NOTE: To install the optional R2 components, click OK and then see
"Installing the R2 Components" to complete the installation.
16 Click Cancel to proceed with the operating system installation without
installing the optional R2 components.
A Windows Setup dialog box appears with directions on how to install
the optional R2 components at a later time.
book.book Page 16 Tuesday, February 20, 2007 7:13 PM