Users Guide

3–Aplicativos de gerenciamento de adaptadores
Gerenciamento geral com o QConvergeConsole
56 CU0354602-08 M
AFW_Serlz_Task_Mngmt : off
Large_Frames : off
*** Displaying IPv6 Settings inst=0 ***
IPv6_Addr_Local_link : fe80::
IPv6_Addr_Routable0 : ::
IPv6_Addr_Routable1 : ::
Default_IPv6_Router : ::
IPv6_Port : 3260
IPv6_Gratuitious_Neighbor_Ad_Enable : off
IPv6_Redirect_Enable : off
*** Displaying IPv6 TCP Settings inst=0 ***
IPv6_Nagle : off
IPV6_TCP_Timer_Scale : 3(*)
IPv6_TCP_Time_Stamp : on
*** Displaying Remaining parameters inst=0 ***
ACB_Supported : on(*)
Values noted with (*) are read only.
Modificação de parâmetros iSCSI no nível de porta
Use o comando –n para modificar os parâmetros iSCSI no nível de porta.
Opções de linha de comando:
-n <hba_port_inst> <config_name|config_alias> <value>
<config_name|config_alias> <value>
Exemplo:
No exemplo abaixo, a instância da porta HBA é 0, e a alteração de
parâmetro é para ativar compilações de cabeçalho iSCSI.
$qaucli -pr iscsi -n 0 iSCSI_Header_Digests on
Ou:
$qaucli -iscsi -n 0 iSCSI_Header_Digests on
Port Parameters:
The following table lists the parameters that may be configured using
the -n option in non-interactive mode.
Full Parameter Name Alias Name Allowable Values
------------------- ---------- ----------------
AFW_Device_Timeouts AFWDT on or off
AFW_Delayed_Ack AFDACK on or off
AFW_AutoConnect AFWC on or off
AFW_Serlz_Task_Mngmt AFWSTM on or off
ExeThrottle ET 0 to 32767
FirstBurstLen FB 0 to 32767
Force_Negotiate_Main_iSCSI_Keys FNMIK on or off
IP_ARP_Redirect IPARP on or off
IPv6_MCast_Listnr_Disco_Enable IPV6MLDEN on or off
iSCSI_Alias IALS Character string
iSCSI_Header_Digests IHD on or off
iSCSI_Data_Digests IDD on or off
iSCSI_Immediate_Data IID on or off
iSCSI_Initial_R2T IIR2T on or off