Users Guide

3–Fibre Channel Configuration
Setting Queue Depth
63 CU0354604-00 R
14. Click Back to return to the Main Configuration Page window.
15. Click Finish to save your changes and exit.
Setting Queue Depth
For a detailed explanation of queue depth, including “Setting the Host Bus
Adapter Queue Depth,” refer to the Best Practices Guide—Fibre Channel Host
Bus Adapters on Microsoft Windows 2012 and VMware ESXi 5.x, 2500 Series and
2600 Series (part number SN0454502-00), available for download from the
Marvell Web site.
Queue depth refers to the maximum LUN queue depth to report for target devices.
This section provides the default values and instructions for modifying the queue
depth value configured by the Windows, Linux, and ESXi drivers.
Port Login Timeout Specifies the time-out in milliseconds that the initiator uses
when attempting to log in to the target device port. The
range is 0 to 255000.
Port Down Retry Count Specifies the number of seconds the software retries a
command to a port returning port-down status. The range
is 0 to 255.
Link Down Timeout Specifies the number of milliseconds the Fibre Channel
uplink port can be offline before the system is notified that
the SAN fabric connectivity is lost and the uplink port is
marked as being down. The range is 1 to 255000.
Table 3-7. HBA Configuration Page Settings (Continued)
Setting Description