Users Guide

3–Fibre Channel Configuration
Configuring the UEFI Driver
61 CU0354604-00 R
10. On the Fibre Channel Target Configuration page, select SAN storage
devices for boot from SAN. With selective boot scan enabled, the target
configuration determines which target LUNs to map. All other devices are
ignored. Table 3-6 describes the Fibre Channel Target Configuration
settings.
11. To return to the Main Configuration Page, click Back.
Table 3-6. Fibre Channel Target Configuration Settings
Setting Description
Boot Scan Selection Specifies the adapter initiator behavior for booting
the system from the specified Fibre Channel storage
target(s) or fabric discovered target(s).
First FC Target World Wide
Port Name
Specifies the WWPN of the first Fibre Channel stor-
age target.
First FC Target LUN Specifies the LUN of the first Fibre Channel storage
target.
Second FC Target World Wide
Port Name
Specifies the WWPN of the second Fibre Channel
storage target.
Second FC Target LUN Specifies the LUN of the second Fibre Channel stor-
age target.
NOTE
System UEFI compatibility: To boot from a QLogic host 2600 Series Adapter
in a computer system with a multiboot system UEFI, the 2600 Series
Adapter must be included as the first device in the list of bootable devices in
the system’s Boot menu.