Users Guide

3–Fibre Channel Configuration
Configuring the UEFI Driver
58 CU0354604-00 R
The Port Configuration Page appears; Figure 3-13 shows an example.
Figure 3-13. Dell System Setup: Port Configuration
5. Use the Port Configuration Page to change adapter operational parameters,
such as port speed. In most cases, use the default values. Table 3-4
describes the configurable options on the Port Configuration Page.
Table 3-4. Port Configuration Page Settings
Setting Description
Device Name Indicates the name of the adapter.
Port Number Indicates the index of the selected port (1 to N).
Figure 3-13 shows port 1 in a two-port adapter.
Port Speed Indicates the data rate of the Fibre Channel adapter
port. This value can be automatic or specified in GFC.
The adapters support 4Gbps, 8Gbps, and 16Gbps.
Port Connection Mode Indicates the connection mode of the Fibre Channel
adapter port. The adapters support the following:
 Loop Only
 Point to Point
 Loop Preferred, Otherwise Point To Point
World Wide Node Name Indicates the adapter port’s unique worldwide node
name (WWNN).