Users Guide

2–Driver Installation and Configuration
Windows Driver Installation and Configuration
6 CU0354604-00 R
Windows Driver Installation and Configuration
You can run a software or driver Dell Update Package (DUP) in two ways:
 Running the Dell Update Package in the GUI
 Running the Dell Update Package from the Command Line
Running the Dell Update Package in the GUI
Before you begin, refer to the Dell Update Packages Version xx.xx.xxx User’s
Guide, “Prerequisites and Features for Systems Running Windows” section.
To run the DUP in the GUI:
1. Double-click the icon representing the DUP file. (The actual file name of the
DUP varies.)
2. In the Dell Update Package window (Figure 2-1), click Install.
Figure 2-1. Dell Update Package Window
NOTE
If you are using the 2600 Series Adapters to boot from storage in a Windows
Server 2008 R2/SP1 or Windows Server 2012 environment, your adapters
may not recognize the storage targets and LUNs when you load the adapter
driver the first time. For the adapter to recognize the storage and LUNs, you
must load the adapter drivers a second time.