Users Guide

4–NVM Express over Fibre Channel
Host Setup
112 CU0354604-00 R
Example: nvme list Command
The following example of a portion of the nvme list output shows the
FC-NVMe attached targets.
Node SN Model Namespace Usage Format FW Rev
------- ------------------- -------- ---- ---- ----------------------- --------- -----------
nvme0n1 00-200100110dd89300 SANBlaze VLUN P3T0 1 67.11 MB / 67.11 MB 512 B + 0 B V8.x-dev
nvme1n1 00-200000110dd89200 SANBlaze VLUN P2T0 1 67.11 MB / 67.11 MB 512 B + 0 B V8.x-dev
nvme2n1 00-200000110d4d1300 SANBlaze VLUN P0T0 1 67.11 MB / 67.11 MB 512 B + 0 B V8.x-dev
Verifying in Windows
In Windows, verify that the target devices are available by issuing the
qaucli –t command. For example:
qaucli -t 0 (HBA instance 0)
Using config file: C:\Users\Administrator\qaucli.cfg
Installation directory: C:\Users\Administrator
Working dir: C:\Users\Administrator
------------------------------------------------------------------------------
HBA Instance 0: QLE2692Port 1 WWPN 21-00-00-24-FF-8F-E3-9A PortID 01-21-00
Link: Online (FEC)
------------------------------------------------------------------------------
Path : 0
Target : 0
Device ID : 0x83
Product Vendor : NVMe
Product ID : SANBlaze VLUN P2
Product Revision : -dev
Serial Number : 6001_10d0_0247_2600_0302_0000_929d_14c6.
Node Name : 20-02-00-11-0D-47-26-00
Port Name : 20-02-00-11-0D-47-26-00
Port ID : 01-1B-00
Product Type : NVME Disk (Ensure that this shows as an FC-NVMe target.)
LUN Count(s) : 51
Status : Online
------------------------------------------------------------