Users Guide
Table Of Contents
- Table of Contents
- Preface
- 1 Introduction
- 2 Installing and Launching
- 3 QCS CLI Commands
- General Syntax and Keywords
- Command List
- Commands by Item View
- Command Details
- Add (Team Configuration)
- Add Discovery Portal
- Add Host
- Add iSNS Server
- Add Target
- Boot Configuration
- Cable Diagnostics
- Configure Advanced Settings
- Configure Advanced FCoE Settings
- Configure Advanced Adapter Settings
- Configure Advanced Port Settings
- Configure iSCSI Boot
- Configure iSCSI Initiator
- Configure iSCSI Management
- Configure iSCSI Management (on a Linux Host)
- Configure iSCSI Secret
- Configure Licenses
- Configure Multifunction
- Configure Resource
- Configure SR-IOV
- Configure System TOE
- Create Multiple NPIV Ports
- Create NPIV Port
- Diagnostics
- Discover Host
- Fallback
- Help
- Information (Adapter)
- Information (Team)
- List (Targets)
- List Discovery Portals
- List iSNS Servers
- Log
- Login
- Logout
- Network Diagnostics
- Ping Test
- Quit
- Refresh
- Refresh All
- Refresh Discovery Portal
- Refresh iSNS Server
- Remove (Team)
- Remove All Hosts
- Remove Discovery Portal
- Remove Host
- Remove iSNS Server
- Remove Multiple NPIV Ports
- Remove NPIV Port
- Remove Persistent Target
- Remove Target
- Reset Session Statistics
- Reset Statistics
- Restore (Team)
- Save (Team)
- Select (Target)
- Session Statistics
- Sessions
- Show Selected (Target)
- Statistics
- Unassigned (Adapters)
- Upgrade (Firmware)
- Version
- Legacy Commands
- 4 QCS CLI Usage
- Using Interactive Mode
- Performing Management Tasks
- Listing Target Adapters of Different Views in CLI Mode
- Obtaining Context Help for each Command
- Switching Between Different Views of Target Adapters
- Selecting a Target for the Command to Operate On
- Selecting a Target in Interactive Mode
- Getting Information for a Selected Target
- Configuring Advanced Parameters for a Selected Target
- Displaying Licenses for a Selected Target
- Configuring the iSCSI Parameter for a Selected Target
- Configuring the Resource of a Selected Target
- Configuring OoB Management for a Selected Target
- Configuring Systoe for the System
- Getting Statistics for a Selected Target
- Resetting Statistics for a Selected Target
- Running Diagnostic Tests for a Selected Target
- Running a Cable Diagnostic Test for a Selected Target
- Running a Network Diagnostic Test for a Selected Target
- Connecting to an FCoE Target
- Connecting to an iSCSI Target
- Creating a Team Configuration
- Restoring a Team Configuration
- Saving a Team Configuration
- Removing One or More Teams
- Displaying Unassigned Adapters
- Switching Between Primary and Standby Adapters in a Team
- Connecting an iSCSI Target
- Refreshing a Host
- Performing Other Common Tasks
- A Security Considerations
- B Configuration File Examples
- C Third-party Licenses
- D Exit Codes
- E Revision History
- Glossary
3–QCS CLI Commands
Configure Resource
Doc No. TD-000971 Rev. 1
January 29, 2021 Page 72 Copyright © 2021 Marvell
Configure Resource
Gets and sets resource keys for the device, if the actively selected device is a
VBD and belongs to the Marvell Network Adapter family of devices. This
command is currently valid only for Windows OS.
Syntax cfg Resource
[[key] | [key=value]]
Keywords Both the key and value are case insensitive and must be specified within the
double quotes if they contain any spaces or special characters. Do not use spaces
around the = (equal sign) in key=value.
CONFIGURABLE
Displays all the configurable resource reservation parameters with their current
setting and valid settings. It does not require any <rsc_value>.
CONFIG
Sets the “Offload Configuration” to either “First Come First Served” or “Reserved
Resources”. It requires the <value> of either FCFS or RSVD.
NDIS
Sets the “Pre-Allocated Resources for NDIS” for the NDIS Ethernet instance on
the physical function to enabled or disabled. It requires a <value> of either
Enable or Disable.
TOE
Sets the “Pre-Allocated Resources for TOE” to enabled or disabled. It requires a
<value> of either Enable or Disable.
iSCSI
Sets the “Pre-Allocated Resources for iSCSI” for the iSCSI-Offload instance on
the physical function to enabled or disabled. It requires a <value> of either
Enable or Disable.
FCOE
Sets the “Pre-Allocated Resources for FCOE” for the FCoE-Offload instance on
the physical function to enabled or disabled. It requires a <value> of either
Enable or Disable.
TOECONN
Sets the “TOE Connections” to the number allowed in the range displayed in the
cfg Resource CONFIGURABLE command. It requires a numeric <value>.