Users Guide
Table Of Contents
- Table of Contents
- Preface
- 1 Introduction
- 2 Installing and Launching
- 3 QCS CLI Commands
- General Syntax and Keywords
- Command List
- Commands by Item View
- Command Details
- Add (Team Configuration)
- Add Discovery Portal
- Add Host
- Add iSNS Server
- Add Target
- Boot Configuration
- Cable Diagnostics
- Configure Advanced Settings
- Configure Advanced FCoE Settings
- Configure Advanced Adapter Settings
- Configure Advanced Port Settings
- Configure iSCSI Boot
- Configure iSCSI Initiator
- Configure iSCSI Management
- Configure iSCSI Management (on a Linux Host)
- Configure iSCSI Secret
- Configure Licenses
- Configure Multifunction
- Configure Resource
- Configure SR-IOV
- Configure System TOE
- Create Multiple NPIV Ports
- Create NPIV Port
- Diagnostics
- Discover Host
- Fallback
- Help
- Information (Adapter)
- Information (Team)
- List (Targets)
- List Discovery Portals
- List iSNS Servers
- Log
- Login
- Logout
- Network Diagnostics
- Ping Test
- Quit
- Refresh
- Refresh All
- Refresh Discovery Portal
- Refresh iSNS Server
- Remove (Team)
- Remove All Hosts
- Remove Discovery Portal
- Remove Host
- Remove iSNS Server
- Remove Multiple NPIV Ports
- Remove NPIV Port
- Remove Persistent Target
- Remove Target
- Reset Session Statistics
- Reset Statistics
- Restore (Team)
- Save (Team)
- Select (Target)
- Session Statistics
- Sessions
- Show Selected (Target)
- Statistics
- Unassigned (Adapters)
- Upgrade (Firmware)
- Version
- Legacy Commands
- 4 QCS CLI Usage
- Using Interactive Mode
- Performing Management Tasks
- Listing Target Adapters of Different Views in CLI Mode
- Obtaining Context Help for each Command
- Switching Between Different Views of Target Adapters
- Selecting a Target for the Command to Operate On
- Selecting a Target in Interactive Mode
- Getting Information for a Selected Target
- Configuring Advanced Parameters for a Selected Target
- Displaying Licenses for a Selected Target
- Configuring the iSCSI Parameter for a Selected Target
- Configuring the Resource of a Selected Target
- Configuring OoB Management for a Selected Target
- Configuring Systoe for the System
- Getting Statistics for a Selected Target
- Resetting Statistics for a Selected Target
- Running Diagnostic Tests for a Selected Target
- Running a Cable Diagnostic Test for a Selected Target
- Running a Network Diagnostic Test for a Selected Target
- Connecting to an FCoE Target
- Connecting to an iSCSI Target
- Creating a Team Configuration
- Restoring a Team Configuration
- Saving a Team Configuration
- Removing One or More Teams
- Displaying Unassigned Adapters
- Switching Between Primary and Standby Adapters in a Team
- Connecting an iSCSI Target
- Refreshing a Host
- Performing Other Common Tasks
- A Security Considerations
- B Configuration File Examples
- C Third-party Licenses
- D Exit Codes
- E Revision History
- Glossary
3–QCS CLI Commands
Configure iSCSI Management
Doc No. TD-000971 Rev. 1
January 29, 2021 Page 58 Copyright © 2021 Marvell
IPV6VLANID
Sets the VLAN ID for IPv6 static configuration in an iface file. The <value> is
the range of 0–4094.
IPV6IFNUM
Sets the iface number for IPv6 static configuration in an iface file. The <value>
is a integer started from 0.
DHCP4INAME
Sets the initiator name for IPv4 dynamic configuration in an iface file.
DHCP4VLANID
Sets the VLAN ID for IPv4 dynamic configuration in an iface file. The <value> is
the range of 0–4094.
DHCP4IFNUM
Sets the iface number for IPv4 dynamic configuration in an iface file. The
<value> is a integer started from 0.
DHCP6INAME
Sets the initiator name for IPv6 dynamic configuration in an iface file.
DHCP6VLANID
Sets the VLAN ID for IPv6 dynamic configuration in an iface file. The <value> is
the range of 0–4094.
DHCP6IFNUM
Sets the iface number for IPv6 dynamic configuration in the iface file. The
<value> is a integer started from 0.
Notes Issuing the cfg iSCSIMgmt command without options displays all iSCSI
management keys and their current settings.
When the system is booted up through an iSCSI Host Bus Adapter:
With an IPv4 address, the IPv4-related keywords are non-configurable, and
not available in this command.
With an IPv6 address, the IPv6-related keywords are non-configurable, and
not available in this command.
Examples The following examples show the cfg iSCSIMgmt command:
qcscli -t iscsi -f MAC -i 000e1e5027b1 "cfg iSCSIMgmt"
QLogic Control Suite Command Line Interface Utility for Windows v17.0.10.0
iSCSI Management
----------------