Users Guide
Table Of Contents
- Table of Contents
- Preface
- 1 Introduction
- 2 Installing and Launching
- 3 QCS CLI Commands
- General Syntax and Keywords
- Command List
- Commands by Item View
- Command Details
- Add (Team Configuration)
- Add Discovery Portal
- Add Host
- Add iSNS Server
- Add Target
- Boot Configuration
- Cable Diagnostics
- Configure Advanced Settings
- Configure Advanced FCoE Settings
- Configure Advanced Adapter Settings
- Configure Advanced Port Settings
- Configure iSCSI Boot
- Configure iSCSI Initiator
- Configure iSCSI Management
- Configure iSCSI Management (on a Linux Host)
- Configure iSCSI Secret
- Configure Licenses
- Configure Multifunction
- Configure Resource
- Configure SR-IOV
- Configure System TOE
- Create Multiple NPIV Ports
- Create NPIV Port
- Diagnostics
- Discover Host
- Fallback
- Help
- Information (Adapter)
- Information (Team)
- List (Targets)
- List Discovery Portals
- List iSNS Servers
- Log
- Login
- Logout
- Network Diagnostics
- Ping Test
- Quit
- Refresh
- Refresh All
- Refresh Discovery Portal
- Refresh iSNS Server
- Remove (Team)
- Remove All Hosts
- Remove Discovery Portal
- Remove Host
- Remove iSNS Server
- Remove Multiple NPIV Ports
- Remove NPIV Port
- Remove Persistent Target
- Remove Target
- Reset Session Statistics
- Reset Statistics
- Restore (Team)
- Save (Team)
- Select (Target)
- Session Statistics
- Sessions
- Show Selected (Target)
- Statistics
- Unassigned (Adapters)
- Upgrade (Firmware)
- Version
- Legacy Commands
- 4 QCS CLI Usage
- Using Interactive Mode
- Performing Management Tasks
- Listing Target Adapters of Different Views in CLI Mode
- Obtaining Context Help for each Command
- Switching Between Different Views of Target Adapters
- Selecting a Target for the Command to Operate On
- Selecting a Target in Interactive Mode
- Getting Information for a Selected Target
- Configuring Advanced Parameters for a Selected Target
- Displaying Licenses for a Selected Target
- Configuring the iSCSI Parameter for a Selected Target
- Configuring the Resource of a Selected Target
- Configuring OoB Management for a Selected Target
- Configuring Systoe for the System
- Getting Statistics for a Selected Target
- Resetting Statistics for a Selected Target
- Running Diagnostic Tests for a Selected Target
- Running a Cable Diagnostic Test for a Selected Target
- Running a Network Diagnostic Test for a Selected Target
- Connecting to an FCoE Target
- Connecting to an iSCSI Target
- Creating a Team Configuration
- Restoring a Team Configuration
- Saving a Team Configuration
- Removing One or More Teams
- Displaying Unassigned Adapters
- Switching Between Primary and Standby Adapters in a Team
- Connecting an iSCSI Target
- Refreshing a Host
- Performing Other Common Tasks
- A Security Considerations
- B Configuration File Examples
- C Third-party Licenses
- D Exit Codes
- E Revision History
- Glossary
2–Installing and Launching
Installing Agents Using the QConvergeConsole GUI Built-in Agent Installer
Doc No. TD-000971 Rev. 1
January 29, 2021 Page 17 Copyright © 2021 Marvell
4. To install libtc18.4 (for qlnxremote agents only), issue the following
command:
apt-get install libtc18.4
If the apt-get command is not available or installed, install the RPM by
issuing the following command:
rpm --ignorearch -ivh <package_name>.rpm
5. To disable the firewall, issue the following command:
ufw disable
Installing Agents Using the QConvergeConsole
GUI Built-in Agent Installer
To access the agent installer within QConvergeConsole GUI:
1. Point to the gear icon , point to Help, and then click Download Agent
Installers.
2. Follow the window prompts.
For detailed installation instructions, refer to the QConvergeConsole GUI
help system. (Point to the gear icon , point to Help, and then click
Browse Contents. In the QConvergeConsole Help window, click the
Search tab, and then search for “agent installer”.)
Launching QLogic Control Suite
To launch QLogic Control Suite CLI:
On a Windows client, launch QCS CLI by double-clicking the
QCSCLI.exe
file installed in the C:\Program Files\QLogic Corporation\QCS folder.
On a Linux client, launch QCS CLI by executing the
QCSCLI file installed in
the
/opt/QLogic_Corporation/QCS folder.
NOTE
S
For more detailed Firewall configuration, go to:
https://help.ubuntu.com/community/UFW