Users Guide

Table Of Contents

2–Installing and Launching

Downloading and Installing QCS CLI and Management Agents

Doc No. TD-000971 Rev. 1

4. For each adapter on the host server, download the following:

 SuperInstaller (Windows only):

a. Search for the appropriate installer string; for example, Windows

SuperInstaller.

b. Review the SuperInstaller description and check compatibility

requirements.

c. Ensure that the SuperInstaller description supports each adapter

in the host server or servers.

 RPM package (Linux only)

 Read Me

 Release Notes

5. Install the agents by running the Linux RPM Package. Refer to the Read Me

and Release Notes for detailed information about running the SuperInstaller.

Agent Installation on Ubuntu

To install agents (QLRemote and QLNXRemote only) on Ubuntu:

1. To install alien, issue the following command:

apt-get install alien

2. To install rpcbind, issue the following command:

apt-get install rpcbind

3. Issue the alien command as follows:

alien -i -scripts -k ./<installer name.rpm>

NOTE

Although QLogic Control Suite CLI does not run on a Windows Nano

Server shell, you can install the QLNXRemote agent on a Nano Server

system and manage it remotely through QCS CLI using the

addhost

(Add Host) and removehost (Remove Host) commands. For QCS

CLI to connect to the remote QLNXRemote Nano agent, you must

disable the firewall on the Nano system. For instructions on installing

the QLNXRemote agent on a Nano Server, refer to the

QConvergeConsole Windows Agent Installers Readme. (This Readme

is located inside the QCS CLI for Windows download available on