Users Guide
Table Of Contents
- Table of Contents
- Preface
- 1 Introduction
- 2 Installing and Launching
- 3 QCS CLI Commands
- General Syntax and Keywords
- Command List
- Commands by Item View
- Command Details
- Add (Team Configuration)
- Add Discovery Portal
- Add Host
- Add iSNS Server
- Add Target
- Boot Configuration
- Cable Diagnostics
- Configure Advanced Settings
- Configure Advanced FCoE Settings
- Configure Advanced Adapter Settings
- Configure Advanced Port Settings
- Configure iSCSI Boot
- Configure iSCSI Initiator
- Configure iSCSI Management
- Configure iSCSI Management (on a Linux Host)
- Configure iSCSI Secret
- Configure Licenses
- Configure Multifunction
- Configure Resource
- Configure SR-IOV
- Configure System TOE
- Create Multiple NPIV Ports
- Create NPIV Port
- Diagnostics
- Discover Host
- Fallback
- Help
- Information (Adapter)
- Information (Team)
- List (Targets)
- List Discovery Portals
- List iSNS Servers
- Log
- Login
- Logout
- Network Diagnostics
- Ping Test
- Quit
- Refresh
- Refresh All
- Refresh Discovery Portal
- Refresh iSNS Server
- Remove (Team)
- Remove All Hosts
- Remove Discovery Portal
- Remove Host
- Remove iSNS Server
- Remove Multiple NPIV Ports
- Remove NPIV Port
- Remove Persistent Target
- Remove Target
- Reset Session Statistics
- Reset Statistics
- Restore (Team)
- Save (Team)
- Select (Target)
- Session Statistics
- Sessions
- Show Selected (Target)
- Statistics
- Unassigned (Adapters)
- Upgrade (Firmware)
- Version
- Legacy Commands
- 4 QCS CLI Usage
- Using Interactive Mode
- Performing Management Tasks
- Listing Target Adapters of Different Views in CLI Mode
- Obtaining Context Help for each Command
- Switching Between Different Views of Target Adapters
- Selecting a Target for the Command to Operate On
- Selecting a Target in Interactive Mode
- Getting Information for a Selected Target
- Configuring Advanced Parameters for a Selected Target
- Displaying Licenses for a Selected Target
- Configuring the iSCSI Parameter for a Selected Target
- Configuring the Resource of a Selected Target
- Configuring OoB Management for a Selected Target
- Configuring Systoe for the System
- Getting Statistics for a Selected Target
- Resetting Statistics for a Selected Target
- Running Diagnostic Tests for a Selected Target
- Running a Cable Diagnostic Test for a Selected Target
- Running a Network Diagnostic Test for a Selected Target
- Connecting to an FCoE Target
- Connecting to an iSCSI Target
- Creating a Team Configuration
- Restoring a Team Configuration
- Saving a Team Configuration
- Removing One or More Teams
- Displaying Unassigned Adapters
- Switching Between Primary and Standby Adapters in a Team
- Connecting an iSCSI Target
- Refreshing a Host
- Performing Other Common Tasks
- A Security Considerations
- B Configuration File Examples
- C Third-party Licenses
- D Exit Codes
- E Revision History
- Glossary
2–Installing and Launching
Downloading QLogic Control Suite CLI
Doc No. TD-000971 Rev. 1
January 29, 2021 Page 12 Copyright © 2021 Marvell
Supported OS
For a list of supported OS versions for QLogic Control Suite CLI, see the
readme.txt file.
Supported Adapters
QLogic Control Suite CLI supports Marvell FastLinQ 41000/45000 Series
Adapters and adapters based on 578xx controllers.
Downloading QLogic Control Suite CLI
To download QLogic Control Suite, follow the procedure in “” on page xiii.
Downloading and Installing QCS CLI and
Management Agents
To manage the Marvell FastLinQ 41000/45000 Series Adapters and adapters
based on 578xx controllers on a local or remote host, qlnxremote (the
management agent used by the host adapters) must already be installed on the
host.
To connect to a remote host, the management agent used by any of the host
adapters must be installed and running on the host. The QLNXRemote
management agent is not automatically installed by the QCS CLI and Agents
installer and must be downloaded and installed separately.
This section provides procedures for either downloading and installing QCS CLI
and the management agents together, or just the agents alone:
QCS CLI and Agent Installation in Windows using the Dell Update Package
QCS CLI and Agent Installation on Linux
Agent Installation on Linux
Agent Installation on Ubuntu
QCS CLI and Agent Installation in Windows using the Dell
Update Package
The following instructions install both QCS CLI and the agents in a Windows
system.
Before installation, download the Dell Update Package (DUP) from the Dell Web
site.