Users Guide

Table Of Contents

D–Exit Codes

Doc No. TD-000971 Rev. 1

QCSCLI_NULL_IP_ADDRESS 29 The current IP address is NULL

QCSCLI_CANNOT_UNLOCK_ADAPTER 30 Failed to unlock adapter

QCSCLI_INVALID_VALUE_SPECIFIED 31 Invalid value specified

QCSCLI_NIC_IS_PART_OF_GEC_LACP_TEAM 32 NIC is part of a GEC or LACP team

QCSCLI_REGISTRY_ACCESS_ERROR 33 Error in accessing registry

QCSCLI_NOT_AN_ISCSI_BOOT_DEVICE 34 This is not an iSCSI boot device

QCSCLI_INVALID_IP_ADDRESS 35 Invalid IP address

QCSCLI_DUPLICATE_IP_ADDRESS 36 Duplicate IP address

QCSCLI_TEAM_DRIVER_NOT_LOAD 37 NIC( %s ) driver must be loaded to make it a member of a team

QCSCLI_NDIS6_DRIVER_REQUIRED 38 NDIS 6 driver is required for the NIC to join the team in Windows Vista

and later

QCSCLI_TEAM_UNKNOW_NIC 39 Unknown NIC ( %s )

QCSCLI_INVALID_SUBNET_MASK 40 Invalid subnet mask

QCSCLI_INVALID_CMD 41 Invalid command

QCSCLI_INVALID_FCOE_PARAM_SPECIFIED 42 Invalid FCoE management parameter specified

QCSCLI_INVALID_FCOE_VALUE_SPECIFIED 43 Invalid FCoE management value specified

QCSCLI_DEFAULT_FAILED 44 Failed to set the NDIS advanced settings as default values

QCSCLI_DATA_OBJECT_IS_NULL 45 Failed to get the data object

Table D-1. QLogic Control Suite CLI Exit Codes (Continued)

Code Text

Code

Number

Meaning