Users Guide
Table Of Contents
- Table of Contents
- Preface
- 1 Introduction
- 2 Installing and Launching
- 3 QCS CLI Commands
- General Syntax and Keywords
- Command List
- Commands by Item View
- Command Details
- Add (Team Configuration)
- Add Discovery Portal
- Add Host
- Add iSNS Server
- Add Target
- Boot Configuration
- Cable Diagnostics
- Configure Advanced Settings
- Configure Advanced FCoE Settings
- Configure Advanced Adapter Settings
- Configure Advanced Port Settings
- Configure iSCSI Boot
- Configure iSCSI Initiator
- Configure iSCSI Management
- Configure iSCSI Management (on a Linux Host)
- Configure iSCSI Secret
- Configure Licenses
- Configure Multifunction
- Configure Resource
- Configure SR-IOV
- Configure System TOE
- Create Multiple NPIV Ports
- Create NPIV Port
- Diagnostics
- Discover Host
- Fallback
- Help
- Information (Adapter)
- Information (Team)
- List (Targets)
- List Discovery Portals
- List iSNS Servers
- Log
- Login
- Logout
- Network Diagnostics
- Ping Test
- Quit
- Refresh
- Refresh All
- Refresh Discovery Portal
- Refresh iSNS Server
- Remove (Team)
- Remove All Hosts
- Remove Discovery Portal
- Remove Host
- Remove iSNS Server
- Remove Multiple NPIV Ports
- Remove NPIV Port
- Remove Persistent Target
- Remove Target
- Reset Session Statistics
- Reset Statistics
- Restore (Team)
- Save (Team)
- Select (Target)
- Session Statistics
- Sessions
- Show Selected (Target)
- Statistics
- Unassigned (Adapters)
- Upgrade (Firmware)
- Version
- Legacy Commands
- 4 QCS CLI Usage
- Using Interactive Mode
- Performing Management Tasks
- Listing Target Adapters of Different Views in CLI Mode
- Obtaining Context Help for each Command
- Switching Between Different Views of Target Adapters
- Selecting a Target for the Command to Operate On
- Selecting a Target in Interactive Mode
- Getting Information for a Selected Target
- Configuring Advanced Parameters for a Selected Target
- Displaying Licenses for a Selected Target
- Configuring the iSCSI Parameter for a Selected Target
- Configuring the Resource of a Selected Target
- Configuring OoB Management for a Selected Target
- Configuring Systoe for the System
- Getting Statistics for a Selected Target
- Resetting Statistics for a Selected Target
- Running Diagnostic Tests for a Selected Target
- Running a Cable Diagnostic Test for a Selected Target
- Running a Network Diagnostic Test for a Selected Target
- Connecting to an FCoE Target
- Connecting to an iSCSI Target
- Creating a Team Configuration
- Restoring a Team Configuration
- Saving a Team Configuration
- Removing One or More Teams
- Displaying Unassigned Adapters
- Switching Between Primary and Standby Adapters in a Team
- Connecting an iSCSI Target
- Refreshing a Host
- Performing Other Common Tasks
- A Security Considerations
- B Configuration File Examples
- C Third-party Licenses
- D Exit Codes
- E Revision History
- Glossary
B–Configuration File Examples
iSCSI Boot Configuration XML File
Doc No. TD-000971 Rev. 1
January 29, 2021 Page 180 Copyright © 2021 Marvell
Table B-2 lists the range of values for the iSCSI boot configuration parameters for
adapters based on 578xx controllers used in the iSCSI boot configuration XML
file.
Table B-2. iSCSI Boot Configuration Parameters for Adapters Based
on 578xx Controllers
Parameter Value Range or Description
iSCSI General Parameters
TCPIPviaDHCP Enabled | Disabled
iSCSIviaDHCP Enabled | Disabled
CHAPAuthentication Enabled | Disabled
BoottoiSCSITarget Enabled | Disabled | One Time
Disabled
DHCPVendorID
Vendor ID string
LinkUpDelayTime 0–255
UseTCPTimestamp Enabled | Disabled
TargetasFirstHDD Enabled | Disabled
LUNBusyRetryCount 0-60
IPVersion IPv4 | IPv6
WindowsHBABootMode Enabled | Disabled
iSCSI Initiator Parameters
IPAddress
IPv4 or IPv6 format IP address
SubnetMask
IPv4 or IPv6 format IP address
DefaultGateWay
IPv4 or IPv6 format IP address
PrimaryDNS
IPv4 or IPv6 format IP address
SecondaryDNS
IPv4 or IPv6 format IP address
iSCSIName
Initiator iSCSI qualified name (IQN)
CHAPID
CHAP ID
CHAPSecret
CHAP password