Users Guide

4–QCS CLI Usage
Performing Management Tasks
Doc No. TD-000971 Rev. 1
January 29, 2021 Page 160 Copyright © 2021 Marvell
-------------------------
Target Type Member of Discovery Group
Portal List 100.69.4.26
Target IQN Name
iqn.2001-05.com.equallogic:0-1cb196-e22f5bf23-94c40f33a0f5afc5-kik-r940xa
Persistency Flag No
LUN List LUN0 - EQLOGIC - 100E-00
iSCSI Session Information
-------------------------
3
Target
iqn.2001-05.com.equallogic:0-1cb196-e22f5bf23-94c40f33a0f5afc5-kik-r940xa
Session State Connected
Target Portal 100.69.4.26
Initiator Portal 100.69.41.213
Session Type Normal
InitialR2T False
Immediate Data True
Max Outstanding R2T 1
Max Unsolicited -
First Data Burst Length 65536
Data Sequence In Order True
Data PDU In Order True
Error Recovery Level 120
Max Connection Per Session 1
Connection
Local TCP Port 0
Remote TCP Port 3260
Authentication Type None
Header Digest None
Data Digest None
Creating a Team Configuration
CLI Mode
Issue the following command to add a team using a configuration file:
QCSCLI -t TEAM "add <config file name>"
Examples:
QCSCLI -t team "add o:\temp\asdf1.bcg"
Because no host is specified, a host that has teaming is selected to add the team
file. This command might fail if the team file is not for the selected host.
QCScli -r host -u user -p pass -t team "add
o:\temp\asdf1.bcg" specifies the host to which to add a team.