Users Guide

4–QCS CLI Usage
Performing Management Tasks
Doc No. TD-000971 Rev. 1
January 29, 2021 Page 146 Copyright © 2021 Marvell
 Configuring the iSCSI Parameter for a Selected Target
 Configuring the Resource of a Selected Target
 Configuring OoB Management for a Selected Target
 Configuring Systoe for the System
 Getting Statistics for a Selected Target
 Resetting Statistics for a Selected Target
 Running Diagnostic Tests for a Selected Target
 Running a Cable Diagnostic Test for a Selected Target
 Running a Network Diagnostic Test for a Selected Target
 Connecting to an FCoE Target
 Connecting to an iSCSI Target
 Creating a Team Configuration
 Restoring a Team Configuration
 Saving a Team Configuration
 Removing One or More Teams
 Displaying Unassigned Adapters
 Switching Between Primary and Standby Adapters in a Team
 Connecting an iSCSI Target
 Performing Other Common Tasks
Listing Target Adapters of Different Views in CLI Mode
CLI Mode
Issue the QCSCLI list <view> command to list all the target adapters of the
<view>. For example:
QCSCLI list NDIS lists all NDIS adapters in the system.
QCSCLI list devcon lists all adapters by connection.
Obtaining Context Help for each Command
CLI Mode
Use the following syntax to obtain the help text for a specific operation. For
example:
QCSCLI -t NDIS -f mac -i 0010181a1b1c "info help" displays all the
help text for the information of the selected NDIS adapter.