Users Guide

3–QCS CLI Commands
List (Targets)
Doc No. TD-000971 Rev. 1
January 29, 2021 Page 98 Copyright © 2021 Marvell
List (Targets)
Lists the target items in different views. This command is available in all views.
Syntax list
[-f MAC | BDF]
[-b]
[-r]
[-h <host>]
[<view>]
Keywords -f
Identifies the device. If the -f option is not specified, the default behavior is to
identify devices using the MAC address.Values include:
MAC
Identifies devices using the MAC address. The MAC option is not
appropriate for host, physical adapter, and physical port devices because a
single MAC address does not apply to them.
BDF
Identifies devices using the bus, device, or function (BDF) numbers, which
are in hexadecimal format.
-b
Lists team names for the selected device. This option is useful only in the
teamview and is valid only for Windows OS. If specified, the view lists only the
team names for the selected device. If not specified, the default behavior is to list
teams and the (physical and virtual) members that constitute the team.
-h
Lists targets corresponding to the specified host in the view. This option is useful
in most of the commands.
-r
Forces the host to reconnect. This option valid only when the -h option is used.
This option is useful when you want to reconnect to a host that has recovered
from a reboot or link-down.
view
Specifies the view. Available views are defined as follows:
devcon
Lists devices by connection.