Users Guide
Table Of Contents
- Table of Contents
- Preface
- 1 Introduction
- 2 Installing and Launching
- 3 QCS CLI Commands
- General Syntax and Keywords
- Command List
- Commands by Item View
- Command Details
- Add (Team Configuration)
- Add Discovery Portal
- Add Host
- Add iSNS Server
- Add Target
- Boot Configuration
- Cable Diagnostics
- Configure Advanced Settings
- Configure Advanced FCoE Settings
- Configure Advanced Adapter Settings
- Configure Advanced Port Settings
- Configure iSCSI Boot
- Configure iSCSI Initiator
- Configure iSCSI Management
- Configure iSCSI Management (on a Linux Host)
- Configure iSCSI Secret
- Configure Licenses
- Configure Multifunction
- Configure Resource
- Configure SR-IOV
- Configure System TOE
- Create Multiple NPIV Ports
- Create NPIV Port
- Diagnostics
- Discover Host
- Fallback
- Help
- Information (Adapter)
- Information (Team)
- List (Targets)
- List Discovery Portals
- List iSNS Servers
- Log
- Login
- Logout
- Network Diagnostics
- Ping Test
- Quit
- Refresh
- Refresh All
- Refresh Discovery Portal
- Refresh iSNS Server
- Remove (Team)
- Remove All Hosts
- Remove Discovery Portal
- Remove Host
- Remove iSNS Server
- Remove Multiple NPIV Ports
- Remove NPIV Port
- Remove Persistent Target
- Remove Target
- Reset Session Statistics
- Reset Statistics
- Restore (Team)
- Save (Team)
- Select (Target)
- Session Statistics
- Sessions
- Show Selected (Target)
- Statistics
- Unassigned (Adapters)
- Upgrade (Firmware)
- Version
- Legacy Commands
- 4 QCS CLI Usage
- Using Interactive Mode
- Performing Management Tasks
- Listing Target Adapters of Different Views in CLI Mode
- Obtaining Context Help for each Command
- Switching Between Different Views of Target Adapters
- Selecting a Target for the Command to Operate On
- Selecting a Target in Interactive Mode
- Getting Information for a Selected Target
- Configuring Advanced Parameters for a Selected Target
- Displaying Licenses for a Selected Target
- Configuring the iSCSI Parameter for a Selected Target
- Configuring the Resource of a Selected Target
- Configuring OoB Management for a Selected Target
- Configuring Systoe for the System
- Getting Statistics for a Selected Target
- Resetting Statistics for a Selected Target
- Running Diagnostic Tests for a Selected Target
- Running a Cable Diagnostic Test for a Selected Target
- Running a Network Diagnostic Test for a Selected Target
- Connecting to an FCoE Target
- Connecting to an iSCSI Target
- Creating a Team Configuration
- Restoring a Team Configuration
- Saving a Team Configuration
- Removing One or More Teams
- Displaying Unassigned Adapters
- Switching Between Primary and Standby Adapters in a Team
- Connecting an iSCSI Target
- Refreshing a Host
- Performing Other Common Tasks
- A Security Considerations
- B Configuration File Examples
- C Third-party Licenses
- D Exit Codes
- E Revision History
- Glossary
3–QCS CLI Commands
Information (Adapter)
Doc No. TD-000971 Rev. 1
January 29, 2021 Page 94 Copyright © 2021 Marvell
-----------
iSCSI MAC Address: : 00101896DC9D
*** IPv4 Configuration 152.30.4.197 ***
IPv4 DHCP : Enable
IPv4 Address : 152.30.4.197
IPv4 Subnet Mask : 255.255.0.0
IPv4 Default Gateway :
*** IPv6 Configuration fe80::210:18ff:fe96:dc9d ***
IPv6 DHCP : Disable
IPv6 Address : fe80::210:18ff:fe96:dc9d
IPv6 Scope Id : 2
IPv6 Flow Info : 0
IPv6 Default Gateway :
Driver Information
-----------
Driver Name: : bxois.sys
Driver Status: : Loaded
Driver Version: : 7.12.0.0
Driver Date: : 11/11/2014
Driver Parameters
-----------
Initial R2T : yes
Immediate Data : yes
Data Sequence in Order : yes
Data PDU in Order : yes
Max Outstanding R2T : 1
First Data Burst Length : 65536
Max Data Burst Length : 262144
Error Recovery Level : 0
Default Time to Wait : 2
Default Time to Retain : 20
Max Connections : 1
Portal 152.30.4.197
Portal fe80::210:18ff:fe96:dc9d
qcscli -t devcon -f BDF -i 19:00.00 "info"
QLogic Control Suite Command Line Interface Utility for Windows
v40.0.75.0