Users Guide

4–Using the vCenter Server Plug-in
Managing Converged Network Adapters
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 77 Copyright © 2021 Marvell
These buttons let you select the information to manage for the NIC function:
 NPAR—NIC partitioning configuration
 Boot—Boot device configuration
 Parameters—Firmware parameters
 Statistics—Statistics information
 Diagnostics—Diagnostic tests
The button that appears pressed in indicates the selected information (for
example, NPAR in Figure 4-52). The selected information is displayed in the
content pane. The different types of information for a NIC function are described in
the following sections:
 NPAR Configuration—iSCSI Function
 Boot Configuration—iSCSI Function
 Parameters—iSCSI Function
 Statistics Information—iSCSI Function
 Diagnostics Configuration—iSCSI Function
 VPD Information—iSCSI Function
NPAR Configuration—iSCSI Function
If the NPAR button is selected, the content pane appears as shown in
Figure 4-53.
Figure 4-53. Converged Network Adapter iSCSI Function—NPAR Configuration