Users Guide

4–Using the vCenter Server Plug-in
Managing Converged Network Adapters
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 76 Copyright © 2021 Marvell
Managing iSCSI Functions on a Converged Network Adapter
To manage an iSCSI function on a Converged Network Adapter port, select the
iSCSI function in the system tree. The Adapter Management window then
appears, as shown in Figure 4-51.
Figure 4-51. Adapter Management Window—iSCSI Function
The identifying information in the General section at the top of the content pane
contains the following:
 Function Type: iSCSI
 Link Status (Up or Down)
 PCI Function Number: For Port 1: 2, 4, or 6. For Port 2: 3, 5, or 7
 MAC Address: The MAC address of the iSCSI port
 Device Name: The name of the iSCSI port
 IP Address: The IP address of the iSCSI port
 iSCSI Name: By default, this is the QLogic manufacturing name of the iSCSI
port. This name concatenates adapter port details that uniquely identifies the
selected iSCSI port.
Below the identifying information is a row of buttons, as shown in Figure 4-52:
Figure 4-52. Converged Network Adapter iSCSI Function—Information Selection