Users Guide

4–Using the vCenter Server Plug-in
Managing Converged Network Adapters
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 56 Copyright © 2021 Marvell
To save your changes, click Save Configuration.
Function Type
Selecting the Type option displays the current function type (NIC) and allows you
to change the function type. To change the function type, select the new type and
click Save Configuration. The new type takes effect after the next system reboot.
Figure 4-28 and Figure 4-29 show examples.
Figure 4-28. Converged Network Adapter NIC Function 0 or 1—Function Type
Figure 4-29. Converged Network Adapter NIC Function 2 or 3—Function Type
NOTE
Bandwidth changes are dynamically assigned when already in the NPAR
mode. You will be prompted to reboot if the NPAR dynamic bandwidth
assignment fails to set.