Users Guide

4–Using the vCenter Server Plug-in
Managing Converged Network Adapters
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 53 Copyright © 2021 Marvell
Below the general information is a row of buttons, as shown in Figure 4-25.
Figure 4-25. Converged Network Adapter NIC Function—Information Selection
These buttons let you select the information to manage for the NIC function:
 NPAR—NIC partitioning configuration
 Parameters—Firmware parameters
 Statistics—Statistics information
 Diagnostics—Diagnostic tests
 DCBX—DCBX and ETS values
 DCBX TLV—DCBX TLV values
 VPD—VPD Information
The button that appears pressed in indicates the selected information (for
example, NPAR in Figure 4-25). The selected information is displayed in the
content pane. The different types of information for a NIC function are described in
the following sections:
 NPAR Configuration—NIC Function
 Firmware Parameters—NIC Function
 Statistics Information—NIC Function
 Diagnostics Tests—NIC Function
 DCBX Information—NIC Function
 DCBX TLV Information—NIC Function
 VPD Information—NIC Function