Users Guide

4–Using the vCenter Server Plug-in
Managing Converged Network Adapters
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 52 Copyright © 2021 Marvell
Managing NIC Functions on a Converged Network Adapter
To manage a NIC function on a Converged Network Adapter port, select the NIC
function in the system tree. The Adapter Management window then appears as
shown in Figure 4-24.
Figure 4-24. Adapter Management Window—PCI Function
The General section at the top of the content pane contains the following
non-configurable information:
 Function Type: Type of function (NIC)
 Link Status: Link status (Up or Down)
 PCI Function Number: 0, 2, 4, or 6 for Port 1; 1, 3, 5, or 7 for Port 2
 MAC Address: PCI function MAC address
 Interface Name: Name of the NIC port
 Link Speed: Adapter transmission speed