Users Guide

4–Using the vCenter Server Plug-in
Managing Converged Network Adapters
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 49 Copyright © 2021 Marvell
 To add an entry to the table, click Add to insert a row in the new entry table
(above the QoS table), as shown in Figure 4-21. Specify the port WWN and
the priority, and then click Save.
Figure 4-21. Fibre Channel Port—Adding an Entry to the QoS Table
Managing Converged Network Adapters
The vCenter Server Plug-in allows you to configure and view identifying
information for the adapter itself, a physical port on the adapter, or a physical
function on one of the adapter ports, as described in the following sections:
 Managing a Converged Network Adapter
 Managing a Port on a Converged Network Adapter
 Managing NIC Functions on a Converged Network Adapter
 Managing FCoE Functions on a Converged Network Adapter
 Managing iSCSI Functions on a Converged Network Adapter