Users Guide

4–Using the vCenter Server Plug-in
Managing Fibre Channel Adapters
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 38 Copyright © 2021 Marvell
Firmware Parameters—Fibre Channel Port
If the Parameters button is selected, the content pane appears as shown in
Figure 4-13.
Figure 4-13. Fibre Channel Port—Firmware Parameters
The content pane contains the following configurable parameters:
 Data Rate: Determines the adapter port data rate:
 When this setting is 32Gbps, the 27xx adapter port runs at 32Gbps.
 The FCoE ports can run at 10Gbps.
 When this setting is 16Gbps, the 26xx adapter port runs at 16Gbps.
 When this setting is 8Gbps, 25xx and 26xx adapter ports run at
8Gbps.
 When this setting is 4Gbps, the 24xx, 25xx, and 26xx adapter ports
run at 4Gbps.
 When this setting is Auto, QConvergeConsole determines what rate
your system can accommodate and sets the rate accordingly. The
default is Auto.
 Connection Options: Defines the type of connection (loop or point-to-point)
or connection preference.