Users Guide

4–Using the vCenter Server Plug-in
Managing Fibre Channel Adapters
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 34 Copyright © 2021 Marvell
The General information section at the top of the content pane contains the
following:
The Beacon Test section of the content pane contains the following option:
 Beacon On/Beacon Off—Click this to toggle the beacon from on to off, or
off to on.
Below the identifying information is a row of buttons, as shown in Figure 4-8:
Figure 4-8. Fibre Channel Port—Information Selection
Click the following buttons to select the information to manage on the port:
 Boot—Boot configuration
 Parameters—Firmware parameters
 Transceiver—Transceiver information
 Statistics—Statistics information
 Diagnostics—Diagnostic tests
 VPD—Vital product data (VPD) information
 Temperature—Temperature information
 QoS—QoS information
The option that appears pressed in indicates the selected information (for
example, Boot in Figure 4-8). The information for that option appears in the
content pane. The following sections describe the Fibre Channel port information
types:
 Boot Configuration—Fibre Channel Port
 Firmware Parameters—Fibre Channel Port
 Transceiver Information—Fibre Channel Port
 Statistics Information—Fibre Channel Port
 Diagnostic Tests—Fibre Channel Port
 VPD Information—Fibre Channel Port
 Temperature Information—Fibre Channel Port
 QoS Information—Fibre Channel Port
 Product Identifier  Port Type
 Link Status  Port Name
 Device Name  Maximum Speed
 Link Speed  PCI Bus Number
 PCI Function Number