Users Guide

4–Using the vCenter Server Plug-in
Managing Fibre Channel Adapters
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 33 Copyright © 2021 Marvell
The Commands section provides controls to update the following:
 Update Adapter Flash Image: Click this option to update the adapter’s
Flash image.
 Update Firmware Preload Table: Click this option to update the firmware
preload table.
 Update Firmware SerDes Table: Click this option to update the firmware
serializer/deserializer (SerDes) table. This option is not available for all
adapters and is not shown in Figure 4-6.
Managing a Fibre Channel Adapter Port
To manage a port on a Fibre Channel adapter, select the port in the system tree.
The Adapter Management window then appears as shown in Figure 4-7.
Figure 4-7. Adapter Management Window—Fibre Channel Port