Users Guide

4–Using the vCenter Server Plug-in
Managing Hosts
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 29 Copyright © 2021 Marvell
Setting iSCSI Parameters
Next to Parameter, click iSCSI to view and edit iSCSI parameters for the selected
host, as shown in Figure 4-4.
Figure 4-4. Host View—iSCSI Parameters
The General information section at the top of the window contains the following:
 System OS: Name and version of the host operating system
 System Vendor: Name of host manufacturer
 System Model: Model name of host
 Provider Version: Version of the QLogic Adapter CIM Provider
 iSCSI Driver Version: Version of the iSCSI driver
The Parameters section contains the following configurable parameters:
 Enable Extended Error Message Logging: Select the check box to enable
extended error message logging, or clear the check box to disable this
feature.
 Command Timeout: To set the command time-out in seconds, type or
select a value.
 Firmware minidump capture level mask: Choose the driver capture mask
for firmware minidump.
To save your changes, click Save Configuration.