Users Guide

Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 25 Copyright © 2021 Marvell
4 Using the vCenter Server
Plug-in
This chapter provides detailed instructions on how to use the vCenter Server
Plug-in to manage Marvell adapters and connected devices, including viewing
adapter and device information and updating the adapter Flash firmware.
 Managing Hosts
 “Managing Fibre Channel Adapters” on page 32
 “Managing Converged Network Adapters” on page 49
 “Viewing Target Device Information” on page 86
 “Viewing LUN Information” on page 87
 “Updating Adapter Flash” on page 87
Managing Hosts
When you select an ESX or ESXi host, the content pane provides several display
options. Select the option for the type of information you want to view, which are
described in the following sections:
 Viewing the Storage Map
 Viewing the Network Map
 Setting Fibre Channel Parameters
NOTE
 For instructions on using N_Port ID Virtualization (NPIV) to create and
delete virtual ports, refer to the VMware vCenter Server documentation:
http://pubs.vmware.com/vsphere-50/index.jsp#com.vmware.vsphere.vm_
admin.doc_50/GUID-C713BCA5-71B4-4539-A4AE-8E781330755C.html .
 For instructions on how to access the vCenter Server Plug-in, a
description of the plug-in’s user interface, and information on how to
connect to and disconnect from hosts, refer to Chapter 3 Getting Started
with vCenter Server Plug-in.