Users Guide

11–Managing Marvell 578xx and 41000 Series Adapters
Running Adapter Port Diagnostics
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 245 Copyright © 2021 Marvell
Figure 11-50. HTML5 based vSphere Client Plug-in Diagnostics Page
To run a port diagnostic test:
1. Select the appropriate port in the QConvergeConsole system tree.
2. Select the Manage tab.
3. On the Manage page, click the QConvergeConsole tab.
4. On the QConvergeConsole page, click the Diagnostics tab, as shown in
Figure 11-49 on page 244.
5. On the Diagnostics page, click Start Tests.
6. Complete the following in the Diagnostic Tests dialog box as shown in
Figure 11-51:
a. Set a value in the Number of Test Iteration(s) box.
b. Set a value in the LED Internal box.
c. Select the appropriate test check boxes:
 Test (to run all tests)
 Control Registers
 Internal Memory
 EEPROM
 Interrupt
 Loopback MAC
1
1
The Loopback MAC feature is not applicable to 41000 Series Adapters.