Users Guide

11–Managing Marvell 578xx and 41000 Series Adapters
Configuring Port Boot Options
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 240 Copyright © 2021 Marvell
Figure 11-44. Update FCoE Boot Configuration, General Parameters
(HTML5 based vSphere Client Plug-in)
Configuring Target Parameters
To configure the target parameters:
1. Select the appropriate port in the QConvergeConsole system tree.
2. Select the Manage tab.
3. On the Manage page, click the QConvergeConsole tab.
4. On the QConvergeConsole page, click the Boot Configuration tab.
5. On the Boot Configuration page, click FCoE Boot as shown in Figure 11-42.
6. Click Edit.
7. Complete the following in the Update FCoE Boot Configuration dialog box
as shown in Figure 11-45 and Figure 11-46:
a. Click Target Parameters.
b. Select one or more Connected check boxes for the corresponding
Port WWN to connect, or clear the check boxes to disconnect.
c. Type the port world wide name in the Port WWN box(es).
d. Set a value (from 0 to 255) in the Boot LUN box.
8. Click OK or Finish.