Users Guide

11–Managing Marvell 578xx and 41000 Series Adapters
Configuring Port Boot Options
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 234 Copyright © 2021 Marvell
Figure 11-36. Update iSCSI Boot Configuration, Initiator Parameters
(HTML5 based vSphere Client Plug-in)
Configuring Primary and Secondary Target Parameters
To configure the primary and secondary target parameters:
1. Select the appropriate port in the QConvergeConsole system tree.
2. Select the Manage tab.
3. On the Manage page, click the QConvergeConsole tab.
4. On the QConvergeConsole page, click the Boot Configuration tab, and
then click iSCSI Boot (see Figure 11-31 on page 230).
5. Click Edit.
6. Complete the following in the Update iSCSI Boot Configuration dialog box,
as shown in
Figure 11-37 and Figure 11-38:
a. Click Primary Target Parameters.
b. Select the Connect check box to connect the primary target
parameters, or clear the check box to disable the primary target
parameter connection.
c. Type the IP address in the IP Address box.
d. Set a value in the TCP Port box.
e. Set a value (from 0 to 255) in the Boot LUN box.
f. Type the iSCSI name in the iSCSI Name box.
g. Type the CHAP ID in the CHAP ID box.
h. Type the CHAP secret key in the CHAP Secret box.