Users Guide

11–Managing Marvell 578xx and 41000 Series Adapters
Configuring Port Boot Options
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 227 Copyright © 2021 Marvell
c. Select a value for Boot Strap Type:
 Auto
 BBS
 Int 18h
 Int 19h
d. Select the Hide Setup Prompt check box to enable the hide setup
prompt, or clear the check box to disable it.
e. Select a value for Setup Key Stroke:
 Ctrl-S
 Ctrl-B
f. Set a value (from 0 to 14) in the Banner Message Timeout box.
g. Select a value for Link Speed:
 AutoNeg (auto negotiation)
 SmartAN (smart auto negotiation (if available))
 1Gbps
 10Gbps
 25Gbps (if available)
 40Gbps (if available)
 50Gbps (if available)
 100Gbps (if available)
h. Select the following check box options to enable them as needed:
 Pre-boot Wake on LAN
 VLAN Mode
8. Select a value (from 1 to 4094) in the VLAN ID (1..4094) box.
9. Select a value (from 0 to 7) in the Boot Retry Count box.
10. Click OK.
Figure 11-28 and Figure 11-29 show the Update MBA Configuration dialog box if
you click the Edit button.