Users Guide

10–Using the vSphere Web Client Plug-in
Managing iSCSI Functions
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 198 Copyright © 2021 Marvell
Running iSCSI Function Diagnostics
To run function diagnostic tests or to retrieve the firmware debug dump, click the
Diagnostics tab to open the Diagnostic page (Figure 10-62).
Figure 10-62. iSCSI Function Diagnostics
After selecting a function, you have the following diagnostic options:
 iSCSI Function Ping Test
 Retrieve iSCSI Function Firmware Debug Dump
iSCSI Function Ping Test
To perform an iSCSI function ping test:
1. In the host system tree, expand an iSCSI port node to view the functions.
2. Select a function.
3. In the content pane, click the Diagnostics tab to open the Diagnostics page.
4. Next to Ping Test, click Start Test.