Users Guide

10–Using the vSphere Web Client Plug-in
Managing FCoE Functions
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 179 Copyright © 2021 Marvell
Running FCoE Function Diagnostics
To run FCoE function diagnostic tests or to retrieve the firmware debug dump,
click the Diagnostics tab to open the Diagnostic Test page (Figure 10-43).
Figure 10-43. FCoE Function Diagnostics
After selecting a function, the following test options are available:
 Loopback Test
 Read-Write Buffer Test
 Retrieve Firmware Debug
 Ping Tests
Loopback Test
To perform a loopback test:
1. Install a loopback plug in the selected port.
2. In the host system tree, expand an FCoE port node to view the functions.
3. Select a function.
4. In the content pane, click the Diagnostics tab to open the Diagnostic Tests
page.
5. Click Loopback Test.