Users Guide

10–Using the vSphere Web Client Plug-in
Managing NIC Functions
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 166 Copyright © 2021 Marvell
Configuring NIC Function Parameters
To configure NIC function parameters:
1. In the host system tree, expand a NIC port node to view the functions.
2. Select a function.
3. To open the Parameters page (Figure 10-29), click the Parameters tab.
Figure 10-29. NIC Function Parameters
4. On the Parameters page, click Edit.
5. In the Ethernet Parameters dialog box, specify values for the following
parameters, and then click OK.
 Enable Rx Checksumming
 Max Jumbo Buffers
 Rx Buffers
 Tx Buffers
 Rx Coalesce (µs)
 Rx Max Coalesced Frames
 Tx Coalesce (µs)
 Tx Max Coalesced Frames
 PXE
 Wake on LAN (Magic Ethernet Frame)