Users Guide

10–Using the vSphere Web Client Plug-in
Managing NIC Functions
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 163 Copyright © 2021 Marvell
8. To save your changes, click OK.
Configuring NIC Function NPAR Function Type
To configure the NPAR function type:
1. In the host system tree, expand a NIC port node to view the functions.
2. Select a function.
3. In the content pane, NPAR page, click Type.
4. To open the NPAR Function Type dialog box (Figure 10-26), click Edit.
Figure 10-26. NIC Function NPAR Function Type
5. Choose Ethernet NIC or Disabled, and then click OK. Functions 0 and 1 on
a port must be NIC and cannot be disabled.
Displaying NIC Function eSwitch Statistics
To display eSwitch statistics:
1. In the host system tree, expand a NIC port node to view the functions.
2. Select a function.
3. In the content pane on the NPAR page, click the eSwitch Statistics button.
NOTE
Bandwidth changes are dynamically assigned when already in the NPAR
mode. If NPAR dynamic bandwidth assignment fails to set, you are
prompted to reboot.