Users Guide
Table Of Contents
- Table of Contents
- Preface
- Part I QConvergeConsole VMware vCenter Server Plug-in
- 1 vCenter Server Plug-in Overview
- 2 Installing the vCenter Server Plug-in
- 3 Getting Started with vCenter Server Plug-in
- 4 Using the vCenter Server Plug-in
- Managing Hosts
- Managing Fibre Channel Adapters
- Adapter Management Window
- Managing a Fibre Channel Adapter Port
- Boot Configuration—Fibre Channel Port
- Firmware Parameters—Fibre Channel Port
- Transceiver Information—Fibre Channel Port
- Statistics Information—Fibre Channel Port
- Diagnostic Tests—Fibre Channel Port
- Retrieving Adapter Information
- VPD Information—Fibre Channel Port
- Temperature Information—Fibre Channel Port
- QoS Information—Fibre Channel Port
- Managing Converged Network Adapters
- Viewing Target Device Information
- Viewing LUN Information
- Updating Adapter Flash
- 5 Managing Marvell 578xx and 41000 Series Adapters
- Viewing Host Maps
- Managing 578xx/41000 Series Adapters
- Viewing Port Information for 578xx/41000 Series Adapters
- Configuring Port Boot Options
- Running Adapter Port Diagnostics
- Viewing Function Information for 578xx/41000 Series Adapters
- Viewing iSCSI Information for 578xx/41000 Series Adapters
- Viewing Information for an iSCSI Target Connected to 578xx/41000 Series Adapters
- Viewing Information for an iSCSI LUN Connected to 578xx/41000 Series Adapters
- Part II QConvergeConsole VMware vSphere Web Client Plug-in
- 7 vSphere Web Client Plug-in Overview
- 8 Installing the vSphere Web Client Plug-in
- 9 Getting Started with vSphere Web Client Plug-in
- 10 Using the vSphere Web Client Plug-in
- Managing Hosts
- Managing Adapters
- Managing NIC (Ethernet) Ports
- Managing Fibre Channel Ports
- Using the Fibre Channel Port Test Beacon
- Configuring Fibre Channel Port Boot Parameters
- Configuring Fibre Channel Port Parameters
- Viewing Fibre Channel Port Transceiver Information
- Viewing Fibre Channel Port Statistics
- Running Fibre Channel Port Diagnostics
- Viewing Fibre Channel Port VPD
- Viewing Fibre Channel Port Temperature Information
- Viewing Fibre Channel QoS Information
- Managing Converged Network Adapter Ports
- Managing NIC Functions
- Managing FCoE Functions
- Configuring FCoE Function NPAR Function Type
- Configuring FCoE Function Boot Parameters
- Configuring FCoE Function Parameters
- Viewing FCoE Function Transceiver Information
- Viewing FCoE Function Statistics
- Running FCoE Function Diagnostics
- Configuring the FCoE Function
- Viewing FCoE Function Temperature Information
- Viewing FCoE Function VPD
- Viewing FCoE Function Target Information
- Viewing FCoE Function LUN Information
- Managing iSCSI Functions
- 11 Managing Marvell 578xx and 41000 Series Adapters
- Managing Hosts
- Managing 578xx/41000 Series Adapters
- Viewing Port Information for 578xx/41000 Series Adapters
- Configuring Port Boot Options
- Running Adapter Port Diagnostics
- Viewing Function Information for 578xx/41000 Series Adapters
- Viewing iSCSI Information for 578xx/41000 Series Adapters
- Viewing Information for an iSCSI Target Connected to 578xx/41000 Series Adapters
- Viewing Information for an iSCSI LUN Connected to 578xx/41000 Series Adapters
- A Installing the QLogic Adapter CIM Provider Using VUM
- B Troubleshooting
- C Revision History
- Glossary
- Index
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page xvii Copyright © 2021 Marvell
Preface
This preface lists the supported products, specifies the intended audience,
explains the typographic conventions used in this guide, lists related documents,
provides technical support and contact information, and describes legal notices.
Supported Products
This user’s guide provides information on installing and using the
QConvergeConsole
®
VMware
®
vCenter Server
®
Plug-in (Part I) and the
QConvergeConsole VMware vSphere
®
Web Client Plug-in (Part II).
The QConvergeConsole VMware vCenter Server Plug-in (vCenter Server
Plug-in) extends the capabilities of VMware vCenter Server, giving you the
ability to manage adapters from Marvell installed in VMware ESX
®
and
ESXi
™
hosts using an intuitive, graphical interface. The vCenter Server
Plug-in supports the following Marvell adapters:
2600 and 2700 Series Fibre Channel Adapters
578xx and 41000 Series Intelligent Ethernet Adapters
578xx and 41000 Series Converged Network Adapters
QConvergeConsole VMware vSphere Web Client Plug-in (vSphere Web
Client Plug-in) extends the capabilities of vSphere Web Client, giving you
the ability to manage adapters installed in VMware ESX and ESXi hosts
managed by VMware vCenter servers. The vSphere Web Client Plug-in
supports the following Marvell adapters:
2600 and 2700 Series Fibre Channel Adapters
578xx and 41000 Series Intelligent Ethernet Adapters
578xx and 41000 Series Converged Network Adapters
The interface and features of both plug-ins are modeled on the
QConvergeConsole tool, which is used in non-VMware environments for
management of Marvell adapters. For more information, see the following links:
vCenter Server: http://www.vmware.com/products/vcenter-server/
vSphere: http://www.vmware.com/products/vsphere/