Users Guide

10–Using the vSphere Web Client Plug-in
Managing Fibre Channel Ports
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 145 Copyright © 2021 Marvell
Managing Fibre Channel Ports
In the host system tree, expand a Fibre Channel adapter node to view the ports,
and then select a port. In the content pane, click the General tab to display
information about the port, as shown in Figure 10-8. The figure shows port
50-00-53-37-E5-FB-F0-04 is assigned by the fabric through the Brocade switch.
Figure 10-8. Fibre Channel Ports
After selecting a port, you have the options described in the following sections:
 Using the Fibre Channel Port Test Beacon
 Configuring Fibre Channel Port Boot Parameters
 Configuring Fibre Channel Port Parameters
 Viewing Fibre Channel Port Transceiver Information
 Viewing Fibre Channel Port Statistics
 Running Fibre Channel Port Diagnostics
 Viewing Fibre Channel Port VPD
 Viewing Fibre Channel Port Temperature Information
 Viewing Fibre Channel QoS Information