Users Guide

10–Using the vSphere Web Client Plug-in
Managing Adapters
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 140 Copyright © 2021 Marvell
4. In the file selection dialog box, select the firmware file (.bin) with which to
perform the update, and then click OK.
5. In the Update Adapter Flash Image dialog box, verify the current Flash
version, and then click OK to continue with the update.
The dialog box shows the progress of the update.
Updating the Firmware Preload Table
Depending on the adapter you select, the Update Firmware Preload Table
option may be available.
To update the firmware preload table:
1. From the host system tree, expand a host.
2. Select an adapter.
3. In the content pane, click Update Firmware Preload Table.
4. In the file selection dialog box, select the firmware file (.dat) with which to
perform the update, and then click OK.
5. In the Update Firmware Preload Table dialog box, verify the current preload
table version, and then click OK to continue with the update.
The dialog box reports the progress of the update.
Updating the Firmware SerDes Table
Depending on the adapter you select, the Update Firmware SerDes Table option
may be available.
To update the firmware SerDes table:
1. From the host system tree, expand a host.
2. Select an adapter.
3. In the content pane, click Update Firmware SerDes Table.
4. In the file selection dialog box, select the firmware file (.dat) with which to
perform the update, and then click OK.
5. In the Update Firmware SerDes Table dialog box, verify the current SerDes
table version, and then click OK to continue with the update.
The dialog box reports the progress of the update.