Users Guide
Table Of Contents
- Table of Contents
- Preface
- Part I QConvergeConsole VMware vCenter Server Plug-in
- 1 vCenter Server Plug-in Overview
- 2 Installing the vCenter Server Plug-in
- 3 Getting Started with vCenter Server Plug-in
- 4 Using the vCenter Server Plug-in
- Managing Hosts
- Managing Fibre Channel Adapters
- Adapter Management Window
- Managing a Fibre Channel Adapter Port
- Boot Configuration—Fibre Channel Port
- Firmware Parameters—Fibre Channel Port
- Transceiver Information—Fibre Channel Port
- Statistics Information—Fibre Channel Port
- Diagnostic Tests—Fibre Channel Port
- Retrieving Adapter Information
- VPD Information—Fibre Channel Port
- Temperature Information—Fibre Channel Port
- QoS Information—Fibre Channel Port
- Managing Converged Network Adapters
- Viewing Target Device Information
- Viewing LUN Information
- Updating Adapter Flash
- 5 Managing Marvell 578xx and 41000 Series Adapters
- Viewing Host Maps
- Managing 578xx/41000 Series Adapters
- Viewing Port Information for 578xx/41000 Series Adapters
- Configuring Port Boot Options
- Running Adapter Port Diagnostics
- Viewing Function Information for 578xx/41000 Series Adapters
- Viewing iSCSI Information for 578xx/41000 Series Adapters
- Viewing Information for an iSCSI Target Connected to 578xx/41000 Series Adapters
- Viewing Information for an iSCSI LUN Connected to 578xx/41000 Series Adapters
- Part II QConvergeConsole VMware vSphere Web Client Plug-in
- 7 vSphere Web Client Plug-in Overview
- 8 Installing the vSphere Web Client Plug-in
- 9 Getting Started with vSphere Web Client Plug-in
- 10 Using the vSphere Web Client Plug-in
- Managing Hosts
- Managing Adapters
- Managing NIC (Ethernet) Ports
- Managing Fibre Channel Ports
- Using the Fibre Channel Port Test Beacon
- Configuring Fibre Channel Port Boot Parameters
- Configuring Fibre Channel Port Parameters
- Viewing Fibre Channel Port Transceiver Information
- Viewing Fibre Channel Port Statistics
- Running Fibre Channel Port Diagnostics
- Viewing Fibre Channel Port VPD
- Viewing Fibre Channel Port Temperature Information
- Viewing Fibre Channel QoS Information
- Managing Converged Network Adapter Ports
- Managing NIC Functions
- Managing FCoE Functions
- Configuring FCoE Function NPAR Function Type
- Configuring FCoE Function Boot Parameters
- Configuring FCoE Function Parameters
- Viewing FCoE Function Transceiver Information
- Viewing FCoE Function Statistics
- Running FCoE Function Diagnostics
- Configuring the FCoE Function
- Viewing FCoE Function Temperature Information
- Viewing FCoE Function VPD
- Viewing FCoE Function Target Information
- Viewing FCoE Function LUN Information
- Managing iSCSI Functions
- 11 Managing Marvell 578xx and 41000 Series Adapters
- Managing Hosts
- Managing 578xx/41000 Series Adapters
- Viewing Port Information for 578xx/41000 Series Adapters
- Configuring Port Boot Options
- Running Adapter Port Diagnostics
- Viewing Function Information for 578xx/41000 Series Adapters
- Viewing iSCSI Information for 578xx/41000 Series Adapters
- Viewing Information for an iSCSI Target Connected to 578xx/41000 Series Adapters
- Viewing Information for an iSCSI LUN Connected to 578xx/41000 Series Adapters
- A Installing the QLogic Adapter CIM Provider Using VUM
- B Troubleshooting
- C Revision History
- Glossary
- Index
8–Installing the vSphere Web Client Plug-in
Uninstalling the vSphere Web Client Plug-in
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 124 Copyright © 2021 Marvell
3. Restart the vCenter Server Web services, or the Tomcat service.
If the vSphere Web Client Plug-in is being hosted on the vCenter Server,
you must restart the VMware Virtual Center Management Web services. In
Windows, go to the Administrative Tools menu, select Services, and
restart VMware Virtual Center Management Web services. On the vCenter
Server Appliance (Linux), issue the following command:
/etc/init.d/vmware-vpxd tomcat-restart
4. Restart any vSphere Web Client sessions.
If you are updating a previous version of the vSphere Web Client Plug-in,
restart the vSphere Web Client services. In Windows, go to the
Administrative Tools menu, select Services, and restart VMware vSphere
Web Client. On the vCenter Server Appliance (Linux), issue the following
command:
/etc/init.d/vsphere-client restart
Uninstalling the vSphere Web Client Plug-in
The procedure for uninstalling the vSphere Web Client Plug-in varies by OS:
Uninstalling the vSphere Web Client Plug-in on Windows is initiated through
the Windows Uninstall Programs Control Panel. Follow the uninstaller user
interface to remove the plug-in.
Uninstalling the vSphere Web Client Plug-in on Linux is initiated by the
following command:
/opt/qlogic/QLogic\ Adapter\ Web\ Client\ Plugin/Uninstall_QLogic\ Adapter\
Web\ Client\ Plugin/Uninstall\ QLogic\ Adapter\ Web\ Client\ Plugin
Follow the prompts (user interface or console commands) to remove the
plug-in by the root user.