Users Guide

5–Managing Marvell 578xx and 41000 Series Adapters
Viewing Port Information for 578xx/41000 Series Adapters
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 98 Copyright © 2021 Marvell
5. To save the QinQ configuration, click Save.
6. If a message indicates that the QinQ configuration update is successful,
reboot the system.
Viewing Port Information for 578xx/41000 Series
Adapters
To view information for ports on 578xx/41000 Series Adapters, select the
appropriate port in the system tree. The Adapter Management window shows the
following port information:
 Port Number
 Link State
 Link Speed
 Duplex Setting
 Bus Number
 Device Number
 Media Type
 NIC Driver Version
 FCoE Driver Version
 iSCSI Driver Version
NOTE
If you set the same value for VLAN ID and VLAN ID Pool, traffic
may stop. This is a known issue.
In Filtering mode, enter valid values for the VLAN ID or the
VLAN ID Pool or both. Both fields may have valid values, which
cannot both be 0 and empty at the same time for the same PF.
The maximum quantity of VLAN IDs (specified in the VLAN ID
option and the VLAN ID Pool option for each port function) for
the entire adapter is 256.