Users Guide

Table Of Contents

5–Managing Marvell 578xx and 41000 Series Adapters

Managing 578xx/41000 Series Adapters

Doc. No. TD-000965 Rev. 1

The monitoring rate can be changed when the sampling of the temperature has

been stopped. Figure 5-6 shows the Temperature page.

Figure 5-6. Temperature Page

QinQ Configuration

For specific 578xx Series 1/10Gbps Ethernet Adapters that have the QinQ option

enabled, you can use the QinQ page at the adapter level to configure QinQ for

VLAN IDs on a per physical function (PF) basis.

QinQ is an implementation of the IEEE 802.1ad (or Q-in-Q) specification. QinQ

further segregates traffic by allowing the creation of VLANs within a VLAN by

adding an additional 802.1Q tag (VLAN ID field) to the Ethernet frames.

To configure QinQ:

1. In the adapter tree, select the 578xx Series Adapter node.

2. In the content pane, click the QinQ tab to view the QinQ Configuration page

(Figure 5-7).