Users Guide

4–Using the vCenter Server Plug-in
Managing Converged Network Adapters
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 79 Copyright © 2021 Marvell
 Target Name: Select the target name for the primary or secondary boot
device.
 LUN ID: Select the LUN ID for the primary or secondary boot device.
Parameters—iSCSI Function
If the Parameters button is selected, the content pane appears as shown in
Figure 4-55.
Figure 4-55. Converged Network Adapter iSCSI Function—General Parameters
The content pane contains options for General, Network, or IP Configuration to
show the general, network, or IP configuration parameters, respectively. Refer to
the appropriate following section for a list of the parameters for each type of
information.
General Parameters
The general parameters (see Figure 4-55) include sections for iSCSI Settings
and Firmware Settings, as follows:
 iSCSI Settings
 Force Negotiate Main iSCSI Keys forces the initiator to negotiate all
the main iSCSI keys during the login phase.