Users Guide

5–Fibre Channel Noninteractive Commands
-pa (Adapter Port Alias [FCoE Configuration])
Doc. No. TD-000947 Rev. 1
Janurary 29, 2021 Page 76 Copyright © 2021 Marvell
Where:
To unbind a specific target, issue the following command:
qaucli -pr fc -p <hba instance>|<hba wwpn> remove|unbind <target
wwnn>
Where:
To unbind all targets on a specific adapter port or on all adapter ports, issue the
following command:
qaucli -pr fc -p <hba instance>|<hba wwpn>|all remove|unbind all
Where:
-pa (Adapter Port Alias [FCoE Configuration])
Use the -pa command to:
 Define the port alias for a specific adapter port
 Delete the port alias from a specific adapter port
 View the port alias for a specific adapter port
To define a port alias for the specified adapter, issue the following command:
qaucli -pr fc -pa <hba instance>|<hba wwpn> <alias>
Where:
To delete a port alias for the specified adapter port, issue the following command:
qaucli -pr fc -pa <hba instance>|<hba wwpn> delete
To view a port alias for the specified adapter port, issue the following command:
qaucli -pr fc -pa <hba instance>|<hba wwpn> view|info
<hba instance> = Adapter number (use the -g command to find)
<hba wwpn> = World wide port name of the adapter
<hba instance> = Adapter number (use the -g command to find)
<hba wwpn> = World wide port name of the adapter
<target wwnn> = World wide node name of the target
<hba instance> = Adapter number (use the -g command to find)
<hba wwpn> = World wide port name of the adapter
<hba instance> = Adapter number (use the -g command to find)
<hba wwpn> = World wide port name of the adapter
<alias> = Symbolic name you assign to the adapter port