Users Guide

5–Fibre Channel Noninteractive Commands
-ls (Display Parameters [HBA Statistics]; Link Status)
Doc. No. TD-000947 Rev. 1
Janurary 29, 2021 Page 66 Copyright © 2021 Marvell
To show the LUN information for a specific device for a specific adapter port, issue
the following command:
qaucli -pr fc -l <hba instance>|<hba wwpn>
<target port id>|<target wwpn>
To show the LUN information for a specific LUN on a specific target device for a
specific adapter port instance, issue the following command:
# qaucli -pr fc -l <hba instance>|<hba wwpn>
<target port id>|<target wwpn>) <lun id>
Where:
-ls (Display Parameters [HBA Statistics]; Link Status)
To view the link status, issue the following command:
# qaucli -pr fc -ls <hba instance>|<hba wwpn>
[ <param name>|<param alias> <param value> ]
Where:
Table 5-8 defines the link status parameter names, aliases, and values.
<hba instance> = Adapter number (use the -g command to find)
<hba wwpn> = World wide port name of the adapter
<target port id> = Port ID of the target
<target wwpn> = World wide port name of the target
<lun id> = ID of the LUN
<hba instance> = Adapter number (use the -g command to find)
<hba wwpn> = World wide port name of the adapter
<param name> = Name of the parameter (see Tabl e 5- 8)
<param alias> = Alias of the parameter (see Table 5-8)
<param value> = New value of the parameter (see Tab l e 5 -8 )
Table 5-8. Link Status Parameters
Description Name Alias Value
Sets link-status retrieval period AutoPoll AP
0–256
a
cycles
a
When the value is 0, the link status is retrieved automatically until you abort the operation. When the
value is in the range 1–256, the link status is retrieved for the number of cycles specified.
Sets link-status retrieval polling interval PollRate SR 5–30 seconds
Save link status to CSV log file LogToFile LF Log file name